Pass Guaranteed Quiz 2024 Realistic Verified Free 5V0-31.22 Exam Dumps [Q17-Q31]

QUESTION 17
Which two functionalities does a NSX Tier-0 Gateway provide to a vSphere with Tanzu deployment? (Choose two.)

Gateway for Segments

Layer 2 Switching

Connectivity to all Tier-1 Gateways

Downlink Connections to Segments

Connectivity to physical networks and routers

QUESTION 18
A systems administrator has recently added newly-commissioned hosts in the the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool.
Which two storage options have this requirement? (Choose two.)

Wols on ISCSI

NFS

vSAN and NFS

vVols on NFS

vSAN

QUESTION 19
What is required as part of enabling the Harbor Image Registry?

Storage Policy

Tanzu Enabled Cluster

Access Control

Resource Limits

QUESTION 20
Which order of steps should an administrator use to replace a failed host in a stretched cluster?

Decommission the failed host.
2. Remove the host using cluster APIs.
3. Add the newly commissioned host to the cluster using cluster APIs. 4 Commission the new host with the correct network.

1 Remove the host using cluster APIs.
2. Decommission the failed host.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.

Remove the host using cluster APIs
2. Decommission the failed host.
3. Add the newly commissioned host to the cluster using cluster APIs.
4. Commission the new host with the correct network

1 Decommission the failed host
2. Remove the host using cluster APIs.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.

QUESTION 21
A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?

Deploy the Management Domain using VMware Cloud Builder.

Prepare and configure the ESXi hosts to be used in the deployment.

Configure the Management Domain using custom certificates.

Upload the Deployment Parameter Workbook.

The next step the systems administrator should take is to prepare and configure the ESXi hosts to be used in the deployment. According to the VMware Cloud Foundation documentation1, before you can deploy the management domain using VMware Cloud Builder, you must prepare the ESXi hosts that will be part of the management domain and the VI workload domains. You need to install ESXi on the hosts, configure the network settings, claim disks for vSAN, and optionally configure certificates for the hosts. You can use different methods to prepare the ESXi hosts, such as using a custom ISO image, using the VMware Imaging Appliance, or installing ESXi interactively1 Uploading the Deployment Parameter Workbook is not the next step, because it is done after preparing the ESXi hosts. The Deployment Parameter Workbook is a spreadsheet that contains all the parameters required for deploying VMware Cloud Foundation, such as IP addresses, host names, passwords, and license keys. You need to download and complete the workbook before uploading it to VMware Cloud Builder1 Configuring the Management Domain using custom certificates is not the next step, because it is an optional step that can be done after deploying the management domain. Custom certificates are used to secure the communication between the components of VMware Cloud Foundation, such as SDDC Manager, vCenter Server, and NSX-T Manager. You can use either self-signed certificates or certificates signed by a certificate authority (CA)1 Deploying the Management Domain using VMware Cloud Builder is not the next step, because it is done after preparing the ESXi hosts and uploading the Deployment Parameter Workbook. The management domain is the first domain that is deployed in VMware Cloud Foundation, and it contains the components for managing and operating the SDDC platform, such as SDDC Manager, vCenter Server, NSX-T Manager, and NSX Edge nodes. You use VMware Cloud Builder to deploy the management domain by following a guided workflow on its UI1

QUESTION 22
During a VCF design workshop, the architect gathered the following customer requirements:
* There must be two environments: PROD and DEV.
* PROD and DEV should be administratively separated.
* PROD will use two different hardware server types, and DEV will only use one hardware server type.
* The VCF infrastructure design should be flexible and scalable as much as possible How many NSX local managers in total will be provisioned after deploying the full VCF infrastructure?

6

3

12

9

QUESTION 23
An administrator is tasked with providing additional North-South throughput to the workloads hosted on overlay-backed networks in a VI Workload Domain stretched cluster. A two-node NSX Edge cluster was previously deployed through SDDC Manager before the cluster was stretched.
Which option is valid to add two nodes to the existing edge cluster while maintaining password rotation capability?

Expand the existing NSX Edge cluster using NSX Manager, and import the additional nodes in SDDC Manager.

Create a new NSX Edge cluster using SDDC Manager on the same stretched Workload Domain cluster.

Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on the same stretched Workload Domain cluster.

Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on a different stretched Workload Domain cluster.

QUESTION 24
An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation.
Which tool should the administrator use for this verification?

vRealize Operation plugin tool forVCF

Support and Serviceability (SoS) tool

SDDC Manager GUI restore health tool

Ruby vSphere Console VCF check tool

QUESTION 25
An architect needs to enable the workload management for a VCF VI workload domain and plans on using the minimum requirement for deploying a highly available NSX edge cluster.
What is the minimum requirement for this deployment?

A cluster of three large NSX edge node

A cluster of one large NSX edge node

A cluster of two large NSX edge nodes

A cluster of two small NSX edge nodes

QUESTION 26
Which order of operations deletes a VI Workload Domain from a VMware Cloud Foundation environment?

1. Migrate VMs.
2. Remove NSX Edge clusters.
3. Remove the Workload Domain.
4. Decommission hosts.
5. Delete the network pool.

1. Migrate VMs.
2. Remove NSX Edge clusters.
3. Remove the Workload Domain.
4. Delete the network pool.
5. Decommission hosts.

1. Migrate VMs.
2. Remove the Workload Domain.
3. Decommission hosts.
4. Delete the network pool.

1. Migrate VMs.
2. Decommission hosts.
3. Remove the Workload Domain.
4. Delete the network pool.

QUESTION 27
An architect needs to create a VMware Cloud Foundation (VCF) VI Workload Domain design with these requirements:
* Design blueprint needs to be repeatable for additional regions
* Multiple availability zones
* Seven nodes per availability zone to host the workloads
* vSAN storage will be used
What is the maximum accepted latency supported by vSAN between the two availability zones’?

10 ms

100 ms

150 ms

5 ms

QUESTION 28
An architect is designing a new vSAN cluster to be added to an existing workload domain for a customer who is on a tight budget.
What is the minimum number of hosts required for this additional cluster?

4

3

1

2

QUESTION 29
A VMware Cloud Foundation administrator has been tasked with replacing self-signed certificates with those signed by a third-party Certificate Authority. A security policy disallows the integration and use of Microsoft Active Directory Certificate Sen/ices and prefers an external provider.
Which two steps must be taken in order to configure these certificates? (Choose two.)

Generate Certificate Signing Requests from SDDC Manager.

Ensure that the external provider has Administrator rights in vCenter.

Create and package the certificates in a domain_name.tar.gz file

Use the sddcmanager-ssl-util.sh utility to list and delete existing certificates.

Generate public-private key pairs using the external provider.

QUESTION 30
What is a valid way to replace the expiring evaluation Tanzu license for a vSphere with Tanzu cluster?

1. Connect to the SDDC Manager.
2. In the navigation pane, click Solutions.
3. Find the cluster, click “Update Workload Management license”, and select the appropriate license.

1. Connect to the SDDC Manager.
2. Go to Administration > Licensing.
3. Add the license key for vSphere with Tanzu.

1. Connect to the vCenter Web Console.
2. Go to Menu > Home > Administration > Licenses
3. Click “Add New Licenses”, and enter the license key.

1. Connect to the vCenter Web Console.
2. Go to “Hosts and Clusters”, and right click on the cluster that supports namespace creation.
3. Click “Assign license”, and select the appropriate license.

QUESTION 31
Which two steps must be performed to create a vSphere with Tanzu namespace? (Choose two.)

Deploy a vSphere Cluster

Define resource limits

Enable Harbor Image Registry

Assign permissions

Use a DNS-compliant name