[Jul-2022 Newly Released] 200-301 Dumps for CCNA Certified [Q33-Q57]

4/5 - (1 vote)

[Jul-2022 Newly Released] 200-301 Dumps for CCNA Certified

Updated Verified 200-301 dumps Q&As – 100% Pass

IP Connectivity: This part focuses on the proficiency of the test takers in the following:

Describing the aim of FHRP
Determining the ways how routers can perform forwarding decisions
Setting and verifying IPv4 & IPv6 static routings
Understanding the components of a routing table
Setting and verifying single area OSPFv2

Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity

The following will be discussed here:

Network mask
Configure and verify single area OSPFv2
Point-to-point
Administrative distance
Neighbor adjacencies
Gateway of last resort
Host route
Routing protocol metric
Configure and verify IPv4 and IPv6 static routing
Longest match
Describe the purpose of first hop redundancy protocol
Administrative distance

Cisco CCNA 200-301 Practice Test Questions, Cisco CCNA 200-301 Exam Practice Test Questions

The Cisco 200-301 exam is a single test required for obtaining the Cisco Certified Network Associate (CCNA) certification. This certificate assists the professionals in validating their knowledge and skills in the IT fundamentals and serves as a springboard for launching their careers in the field.

NEW QUESTION 33

Refer to the exhibit. An engineer configured the New York router with static routes that point to the Atlanta and Washington sites. Which command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router?

ipv6 route::/0 Serial 0/0/0

ipv6 route::/0 Serial 0/0/1

ipv6 route:0/0 Serial 0/0/0

ip route 0.0.0.0 0.0.0.0 Serial 0/0/0

ipv6 route::/0 2000::2

Section: IP Connectivity
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_pi/configuration/xe-3s/iri-xe-3s-book/ip6- route-static-xe.html#GUID-85796C3A-3143-4DF7-B9D0-8EC87D0DB08B

NEW QUESTION 34
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right

NEW QUESTION 35
An engineer must configure a WLAN using the strongest encryption type for WPA2-PSK.
Which cipher fulfills the configuration requirement?

WEP

AES

RC4

TKIP

NEW QUESTION 36
Which 802.11 frame type is Association Response?

management

protected frame

action

control

Section: Network Fundamentals
Explanation:
There are three main types of 802.11 frames: the Data Frame, the Management Frame and the Control Frame.
Association Response belongs to Management Frame. Association response is sent in response to an association request.
Reference: https://en.wikipedia.org/wiki/802.11_Frame_Types

NEW QUESTION 37
Refer to the exhibit.

The DHCP server and clients are connected to the same switch. What is the next step to complete the DHCP configuration to allow clients on VLAN 1 to receive addresses from the DHCP server?

Configure the ip dhcp snooping trust command on the interlace that is connected to the DHCP client.

Configure the ip dhcp relay information option command on the interface that is connected to the DHCP client.

Configure the ip dhcp snooping trust command on the interface that is connected to the DHCP server.

Configure the Ip dhcp relay information option command on the interface that is connected to the DHCP server.

NEW QUESTION 38

Refer to the exhibit. How does router R1 handle traffic to 192.168.10.16?

It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.

It selects the EIGRP route because it has the lowest administrative distance.

It selects the OSPF route because it has the lowest cost.

It selects the RIP route because it has the longest prefix inclusive of the destination address.

NEW QUESTION 39
Refer to the exhibit.

What action establishes the OSPF neighbor relationship without forming an adjacency?

modify hello interval

modify process ID

modify priority

modify network type

NEW QUESTION 40
When configuring a WLAN with WPA2 PSK in the Cisco Wireless LAN Controller GUI, which two formats are available to select? (Choose two.)

decimal

ASCII

hexadecimal

binary

base64

Section: Security Fundamentals
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/multi- preshared-key.pdf

NEW QUESTION 41
Refer to the exhibit.

What is the effect of the given configuration?

It configures an inactive switch virtual interface.

It configures an active management interface.

It configures the native VLAN.

It configures the default VLAN.

NEW QUESTION 42
Drag and drop the network protocols from the left onto the correct transport services on the right.

NEW QUESTION 43

Refer to the exhibit. An engineer is configuring the New York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it reaches the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two.)

Ipv6 route 2000::1/128 2012::1

Ipv6 route 2000::1/128 2012::1 5

Ipv6 route 2000::1/128 2012::2

Ipv6 route 2000::1/128 2023::2 5

Ipv6 route 2000::1/128 2023::3 5

Section: IP Connectivity
Explanation:
Floating static routes are static routes that have an administrative distance greater than the administrative distance (AD) of another static route or dynamic routes. By default a static route has an AD of 1 then floating static route must have the AD greater than 1. Floating static route has a manually configured administrative distance greater than that of the primary route and therefore would not be in the routing table until the primary route fails.

NEW QUESTION 44
Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

ipv6 address dhcp

ipv6 address 2001:DB8:5:112::/64 eui-64

ipv6 address autoconfig

ipv6 address 2001:DB8:5:112::2/64 link-local

NEW QUESTION 45
Which option about JSON is true?

uses predefined tags or angle brackets () to delimit markup text

used to describe structured data that includes arrays

used for storing information

similar to HTML, it is more verbose than XML

Explanation
JSON data is written as name/value pairs.A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:”name”:”Mark”JSON can use arrays. Array values must be of type string, number, object, array, boolean or null..For example:{“name”:”John”,”age”:30,”cars”:[ “Ford”,
“BMW”, “Fiat” ]}

NEW QUESTION 46
Refer to the exhibit.

A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?

Option A

Option B

Option C

Option D

NEW QUESTION 47
Users in the main office complain that they are unable to reach internet sites. You observe that internet traffic that is destined towards ISP router is not forwarded correctly on Router R1.
What could be an issue?
Ping to Internet server shows the following results from Rl:
R1#ping 209.165.200.225
Type escape sequence to abort.
Sending5, 100-byte ICMP Echos to 209.165.200.225, timeout is 2 seconds:
…..
Success rate is 0 percent (0/5)

The next hop router address for the default route is incorrectly configured.

Default route pointing to ISP router is not configured on Router R1.

Default route pointing to ISP router is configured with AD of 225.

Router R1 configured as DHCP client is not receiving default route via DHCP from ISP router.

NEW QUESTION 48

Refer to the exhibit. What is the effect of this configuration?

The switch port remains administratively down until the interface is connected to another switch.

Dynamic ARP Inspection is disabled because the ARP ACL is missing.

The switch port interface trust state becomes untrusted.

The switch port remains down until it is configured to trust or untrust incoming packets.

Section: Security Fundamentals

NEW QUESTION 49
Refer to the exhibit.

The default-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet.
Which action corrects the configuration issue?

Add the default-information originate command on R2.

Add the always keyword to the default-information originate command on R1.

Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.18 command on R1.

Configure the ip route 0.0.0.0 0.0.0.0 10.10.10.2 command on R2.

NEW QUESTION 50
Refer to the exhibit. If R1 receives a packet destined to 172.16.1.1, to which IP address does it send the packet?

192.168.12.2

192.168.13.3

192.168.14.4

192.168.15.5

NEW QUESTION 51
Refer to the exhibit. If OSPF is running on this network, how does Router2 handle traffic from Site B to 10.10.13.128/25 at Site A?

It load-balances traffic out of Fa0/1 and Fa0/2.

It is unreachable and discards the traffic.

It sends packets out of interface FaO/2.

It sends packets out of interface Fa0/1.

NEW QUESTION 52
How many broadcast domains are shown in the graphic assuming only the default vlan is configured on the switches?

one

six

twelve

two

NEW QUESTION 53
Refer to the exhibit.

If the network environment is operating normally, which type of device must be connected to interface FastEthernet 0/1?

DHCP client

access point

router

NEW QUESTION 54
Refer to the exhibit.

An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?

10.4.4.4

10.4.4.5

172.23.103.10

172.23.104.4

NEW QUESTION 55
Refer to the exhibit.

What is the effect of this configuration?

All ARP packets are dropped by the switch

Egress traffic is passed only if the destination is a DHCP server.

All ingress and egress traffic is dropped because the interface is untrusted

The switch discard all ingress ARP traffic with invalid MAC-to-IP address bindings.

Explanation
Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.

NEW QUESTION 56
which command can you enter in a network switch configuration so that learned mac addresses are saved in configuration as they connect?

Switch (config-if)#Switch port-security

Switch (config-if)#Switch port-security Mac-address stcky

Switch (config-if)#Switch port-security maximum 10

Switch (config-if)#Switch mode access

NEW QUESTION 57
Drag the descriptions of device management from the left onto the types of device management on the right.

Cisco DNA Center Device Management
3. Monitor the cloud for software update
5. Uses CLI templates to apply a consistent configuration to multiple devices at an individual location
6. Uses NetFlow to analyse potential security threats throughout the network and take appropriate action on that traffic Traditional device management
2. Manages device configuration on a per-device basis
4. Security is managed near the perimeter of the network with firewalls, VPNs, and IPS Implements changes via an SSH terminal

Loading …