Posted on
4/5 - (2 votes)

Prepare for the Actual CCA-N 1Y0-231 Exam Practice Materials Collection

CCA-N Certified Official Practice Test 1Y0-231 – Feb-2026

NEW QUESTION 100
What can a Citrix Administrator configure to filter IPv4 addresses?

 
 
 
 

NEW QUESTION 101
Scenario: A Citrix ADC receives packets that are destined for a service IP address owned by the Citrix ADC. The destination MAC address is NOT owned by the Citrix ADC. Layer 2 Mode is enabled on the Citrix ADC.
What will the Citrix ADC do with the packets in this scenario?

 
 
 
 

NEW QUESTION 102
A Citrix Administrator needs to configure single sign-on to a StoreFront server using an external, secure single URL.
Which type of virtual server can the administrator use to meet this requirement?

 
 
 
 

NEW QUESTION 103
If VLAN 20 is bound to an interface tagged in an environment where a Citrix ADC is configured with default settings, which VLAN(s) will be bound to that interface?

 
 
 
 

NEW QUESTION 104
A Citrix Administrator needs to validate that users are NOT disabling a Microsoft Windows service after connecting to company resources through the Citrix Gateway. What can the administrator configure in this scenario?

 
 
 
 

NEW QUESTION 105
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?

 
 
 
 

NEW QUESTION 106
Scenario: Users are attempting to logon through Citrix Gateway. They successfully pass the Endpoint Analysis (EPA) scan, but are NOT able to see the client choices at logon.
What can a Citrix Administrator disable to allow users to see the client choices at logon?

 
 
 
 

NEW QUESTION 107
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server (IP address
192.168.100.25). The administrator needs to restrict access to this virtual server for 10 minutes.
Which access control list (ACL) will accomplish this?

 
 
 
 

NEW QUESTION 108
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?

 
 
 
 

NEW QUESTION 109
Scenario: A Citrix Administrator is configuring a new authentication, authorization, and auditing (AAA) virtual server, and the status is DOWN. The administrator makes the below configurations:
add lb vserver lb_vsrv_www HTTP 10.107.149.229 80 -persistenceType NONE -cltTimeout 180 -authn401 ON
-authnVsName SAML_SP
bind lb vserver lb_vsrv_www_ssl Red_srv
bind lb vserver Ib_vsrv_www_ssl Blue_srv
add authentication vserver SAML_SP SSL 10.107.149.230 443 -AuthenticationDomain citrix.lab What should the administrator bind to the virtual server SAML_SP to complete the installation and change the status to UP?

 
 
 
 

NEW QUESTION 110
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

 
 
 
 

NEW QUESTION 111
Which statement correctly describes a feature of SAML authentication?

 
 
 
 
 

NEW QUESTION 112
A Citrix Administrator is concerned about preventing an SSL renegotiation attack.
What must the administrator do to prevent an SSL renegotiation attack against the Citrix ADC?

 
 
 
 

NEW QUESTION 113
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?

 
 
 
 

NEW QUESTION 114
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode. The current load-balancing setup on the Citrix ADC is:
* One load-balancing virtual server with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?

 
 
 
 

NEW QUESTION 115
Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string
“/mytraining” is added to every URL path received.
The administrator should use these commands to accomplish this:
> add responder action Redirect_Act redirect
“HTTP.REQ.URL.PATH_AND_QUERY+”mytraining”” -responseStatusCode 302
> add responder policy Redirect_Pol ___________ Redirect_Act
> bind lb vServer lb_vsrv_www -policyName Redirect_Pol -priority 100 -gotoPriorityExpression END -type _______ (Choose the correct option to complete the set of commands.)

 
 
 
 

NEW QUESTION 116
Which set of items can a Citrix Administrator change when configuring a portal theme for users?

 
 
 
 

NEW QUESTION 117
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?

 
 
 
 

NEW QUESTION 118
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

 
 
 
 

Citrix CCA-AppDS Exam Syllabus Topics:

Section Objectives Weight
Getting Started – Understand the Citrix ADC architecture and functionality.
– Identify Citrix ADC hardware and its components.
– Determine the deployment and licensing options for a given environment.
– Determine how to setup and configure Citrix ADC.		 5%
Troubleshooting – Determine how to resolve Citrix ADC log issues.
– Determine how to monitor the Citrix ADC environment with Simple Network Management Protocol data.
– Determine how to use AppFlow and Citrix Application Delivery Management features to troubleshoot an issue within Citrix ADC.
– Determine how to use the Citrix Application Delivery Management to troubleshoot a given issue.
– Determine which Citrix ADC troubleshooting tool to use to identify a given issue in an environment.		 8%
AppExpert – Determine the appropriate policy expression structure of AppExpert to be used for a given environment.
– Determine how to configure pattern sets and data sets for a given environment.
– Determine how to utilize policy bind points for a given environment.
– Determine how to use AppExpert with Citrix Gateway.		 6%
Securing the Citrix ADC – Determine how to utilize authentication, authorization, and auditing.
– Determine how to configure authentication and authorization on Citrix ADC.
– Determine the components and steps required to secure a Citrix ADC configuration.
– Determine how to utilize admin partitions in a given scenario.		 6%
High Availability – Understand how the high availability (HA) process works on Citrix ADC.
– Determine the appropriate Citrix ADC high availability configuration options, including advanced settings, given a description of an environment.
– Determine which method should be used to manage a Citrix ADC high availability configuration given a scenario.
– Determine how to resolve common high availability issues.		 6%
Integration for Citrix Virtual Apps and Desktops Solutions – Determine how to integrate Citrix Gateway with Citrix Virtual Apps and Desktops.
– Determine how to integrate with StoreFront.
– Determine how to configure SmartControl for a given scenario.
– Determine how to configure SmartAccess for a given scenario.		 8%
SSL Offload – Determine the process and requirement for creating and uploading SSL Certificates.
– Determine how to create SSL virtual servers.
– Determine which SSL deployment to use for a given environment.
– Determine which Citrix ADC configuration settings can prevent a given SSL Exploit.		 6%
Customizing Citrix Gateway – Determine how to configure Citrix Gateway applications based on given requirements.
– Determine how to configure RDP Proxy for a given environment.
– Determine how to configure portal themes for a given environment.		 5%

Citrix 1Y0-231 exam measures a candidate’s understanding of the deployment and management of Citrix ADC and Citrix Gateway, including the installation, configuration, optimization, and troubleshooting of these solutions. It covers various topics such as Citrix ADC and Gateway architecture, security features, SSL certificates, high availability, load balancing, and traffic management. 1Y0-231 exam is designed to test the candidate’s ability to identify and resolve issues related to Citrix ADC and Gateway configurations.

Citrix 1Y0-231 certification exam is designed for individuals who want to demonstrate their skills in deploying and managing Citrix ADC 13 with Citrix Gateway. Citrix ADC 13 is a powerful application delivery controller that provides load balancing, security, and acceleration capabilities for applications, while Citrix Gateway provides secure remote access to these applications from anywhere, on any device. Deploy and Manage Citrix ADC 13 with Citrix Gateway certification exam is intended to validate the knowledge and skills required to configure, deploy, and manage Citrix ADC 13 and Citrix Gateway.

 

Ace Citrix 1Y0-231 Certification with Actual Questions Feb 25, 2026 Updated: https://www.passleadervce.com/CCA-N/reliable-1Y0-231-exam-learning-guide.html

         

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

By adminTags: , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below