NEW QUESTION 19
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich.
Which health monitor setting should be used to verify that the firewalls are able to forward traffic?

NEW QUESTION 20
An LTM Specialist needs to configures virtual server that uses PVA or OPVA.
Which virtual server type should be used?

NEW QUESTION 21
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?

NEW QUESTION 22
A traffic-group contains only floating Self IPs. What happens during failover?

NEW QUESTION 23
Refer to the exhibit.

The http monitor is applied to a pool. All members are enabled. One server responds as follows.

What is the resulting status of this poo! member?

NEW QUESTION 24
A virtual server configuration for traffic destined to a server is as shown:

FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?

NEW QUESTION 25
An ITM Specialist has the configuration shown:

The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?

NEW QUESTION 26
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server.
The virtual server configuration is as follows:

Which LTM device profile should be used on the LTM device to reduce the CPU load on the current?

NEW QUESTION 27
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?

NEW QUESTION 28
An LTM device needs to be configured a virtual server.
The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?

NEW QUESTION 29
An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.
Which step should the LTM Specialist take to meet this requirement?

NEW QUESTION 30
A virtual server is configured to handle https traffic. The clientssl profile is configured to use a2048-bit RSA key.
Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.
What two effects will this change have on the BIG-IP device? (Choose two)

NEW QUESTION 31
An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.
Which virtual server type should an LTM Specialist configure on the LTM device?

NEW QUESTION 32
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

NEW QUESTION 33
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?

NEW QUESTION 34
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)

NEW QUESTION 35
AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client’s IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

NEW QUESTION 36
AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

NEW QUESTION 37
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?

NEW QUESTION 38
Remote office users are having performance issues with a virtual hosted on the F5 LTM.
The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?

NEW QUESTION 39
Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?

NEW QUESTION 40
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?

NEW QUESTION 41
Refer to the exhibit.

The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.
Which changes need to be made?

NEW QUESTION 42
An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server.
The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?