[Jun 04, 2022] Prepare For The NSE5_FMG-6.4 Question Papers In Advance [Q36-Q59]

4.2/5 - (4 votes)

[Jun 04, 2022] Prepare For The NSE5_FMG-6.4 Question Papers In Advance

NSE5_FMG-6.4 PDF Dumps Real 2022 Recently Updated Questions

Fortinet NSE5_FMG-6.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Create and install policy packages Configure FortiManager as local FDS
Topic 2	Identify how the ADOM version affects policy and object configurations Troubleshoot device communication issues
Topic 3	Install device level configuration changes Perform initial configuration
Topic 4	Configure FortiManager HA Customize and generate reports
Topic 5	Manage registered devices Configure security fabric using central management
Topic 6	Troubleshoot import and installation issues between FortiManager and FortiGate Configure SD-WAN using central management

NEW QUESTION 36
What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

NEW QUESTION 37
View the following exhibit.

Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

NEW QUESTION 38
Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

NEW QUESTION 39
Which configuration setting for FortiGate is part of a device-level database on FortiManager?

VIP and IP Pools

Firewall policies

Security profiles

Routing

NEW QUESTION 40
Which three settings are the factory default settings on FortiManager? (Choose three.)

Username is admin

Password is fortinet

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

NEW QUESTION 41
What will be the result of reverting to a previous revision version in the revision history?

It will install configuration changes to managed device automatically

It will tag the device settings status as Auto-Update

It will generate a new version ID and remove all other revision history versions

It will modify the device-level database

NEW QUESTION 42
Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It will not create a new revision in the revision history

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It provides the option to preview configuration changes prior to installing them

NEW QUESTION 43
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

NEW QUESTION 44
Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level

NEW QUESTION 45
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.
In which database will the configuration be saved?

Device-level database

Revision history database

ADOM-level database

Configuration-level database

NEW QUESTION 46
View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

NEW QUESTION 47
What does a policy package status of Modified indicate?

FortiManager is unable to determine the policy package status

The policy package was never imported after a device was registered on FortiManager

The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager

The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

NEW QUESTION 48
Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

NEW QUESTION 49
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

NEW QUESTION 50
What does the diagnose dvm check-integrity command do? (Choose two.)

Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM syntax

Verifies and corrects unregistered, registered, and deleted device states

Verifies and corrects database schemas in all object tables

Verifies and corrects duplicate VDOM entries

NEW QUESTION 51
What does a policy package status of Conflict indicate?

The policy package reports inconsistencies and conflicts during a Policy Consistency Check.

The policy package does not have a FortiGate as the installation target.

The policy package configuration has been changed on both FortiManager and the managed device independently.

The policy configuration has never been imported after a device was registered on FortiManager.

NEW QUESTION 52
Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

NEW QUESTION 53
Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

NEW QUESTION 54
Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

Backs up all devices and the FortiGuard database.

Does not back up firmware images saved on FortiManager

Supports FTP, SCP, and SFTP

Can be configured from the CLI and GUI

NEW QUESTION 55
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

NEW QUESTION 56
View the following exhibit.

What is the purpose of setting ADOM Mode to Advanced?

The setting allows automatic updates to the policy package configuration for a managed device

The setting enables the ADOMs feature on FortiManager

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

The setting disables concurrent ADOM access and adds ADOM locking

NEW QUESTION 57
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a

By an Asterisk (*) at the end of the device name

NEW QUESTION 58
An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

Restore the configuration from a previous backup.

Delete the previous admin session manually through the FortiManager GUI or CLI.

NEW QUESTION 59
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces