Posted on
4.5/5 - (6 votes)

[Mar 18, 2023] Valid 301a Test Answers & 301a Exam PDF

Valid LTM Specialist 301a Dumps Ensure Your Passing

How to Prepare For F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Preparation Guide for F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Introduction

An F5 Certified BIG-IP Administrator can handle application delivery networks (ADNs) and F5 Traffic Management Operating System (TMOS) devices, as well as conduct routine management and troubleshooting. The F5-CA qualification requires passing two exams:

  • Exam 301a-TMOS Administration
  • Exam 101-Fundamentals of Application Delivery

Pre-existing BIG-IP implementations and provisional fault isolation are managed by an F5 Certified BIG-IP Administrator. They must be able to edit BIG-IP artefacts and make appropriate configuration adjustments. They’re still in charge of application delivery networks (ADNs) and managing and troubleshooting F5 Traffic Management Operating System (TMOS) devices on a regular basis. These Certified Experts manage BIG-IP infrastructure such as virtual servers, pools, pool owners, nodes, accounts, and displays using TMSH and a setup utility. They also maintain BIG-IP repositories and build, rebuild, and manage them. Certified BIG-IP Administrators must therefore review the state, functionality, and statistics of a resource in order to consider how BIG-IP networks are actually handling traffic.

The function of BIG-IP systems as a proxy mechanism inside an ADN is defined by administrators. BIG-IP devices are set up, licensed, and provisioned by them. Profiles are used by a Certified BIG-IP Administrator to monitor how BIG-IP networks handle traffic across virtual servers. They’re also in need of utilizing different medical methods to troubleshoot and diagnose issues. After it has been mounted, configured, and applied, passing this exam demonstrates independence in conducting day-to-day operations and simple troubleshooting of TMOS-based systems in different application environments. Individuals may opt to finish their credential path here or go on to the Technical Professional, Technical Specialist, Cloud, or Security Solutions tracks. In this guide we will cover all the aspects of F5-301a exam dumps and F5-301a practice exams.

Who should take the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

People who choose to receive an F5 Professional Certification, which certifies their abilities to manipulate the whole device stack, from standard network experience to specialized application-layer awareness, and the ability to combine the two realms. Candidates should be familiar with network fundamentals, protocols, and general traffic control principles. The student should also be familiar with the basics of F5 technologies as they pertain to network fundamentals, protocols, and traffic control. PassLeaderVCE provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a exam dumps in PDF format, which candidates can import and review offline.

The following knowledge/abilities are required of candidates:

  • Describe HTTP’s legitimate uses and processes.
  • Recognize and identify the TMOS elements (F5 Traffic Management Operating System).
  • Describe the Open Systems Interconnection (OSI) model’s seven layers.
  • Describe the benefits of using a complete device proxy.

The F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam certification is a globally recognized credential that certifies individuals as F5 Certified Technology Specialists. If an applicant wishes to advance in their profession, they must develop their experience, qualifications, and abilities. This specialized expertise and ability is shown by the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam qualification. If an applicant has passed the F5 LTM Specialist: Architect, Setup, and Deploy 301a Exam and has knowledge of the related technology and skills needed to pass the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam, he can take this exam.

 

NEW QUESTION 61
Refer to the exhibit.

An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?

 
 
 
 

NEW QUESTION 62
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?

 
 
 
 

NEW QUESTION 63
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?

 
 
 
 

NEW QUESTION 64
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter “environment=development” to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?

 
 
 
 

NEW QUESTION 65
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?

 
 
 
 

NEW QUESTION 66
A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?

 
 
 
 

NEW QUESTION 67
A virtual server is configured to handle https traffic. The clientssl profile is configured to use a2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.
What two effects will this change have on the BIG-IP device? (Choose two)

 
 
 
 
 

NEW QUESTION 68
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?

 
 
 
 

NEW QUESTION 69
Exhibit.

– The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
– LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
– An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
– Device GROUP X has four Traffic Groups A, B, C and D configured.
– Device Group Y has four Traffic Groups E, F, G, and H configured
– Auto Fallback IS NOT Enabled.
– Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)

B)

C)

D)

 
 
 
 

NEW QUESTION 70
The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.
How should the LTM Specialist configure this route?

 
 
 
 

NEW QUESTION 71
Exhibit.

The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.
How should the F5 device interfaces be configured?

 
 
 
 

NEW QUESTION 72
An LTM Specialist has detected that a brute force login attack is occurring against the SSH service via a BIG-IP management interface. Login attempts are occurring from many IPs within the internal company network. BIG-IP SSH access restrictions are in place as follows:

The LTM Specialist has determined that SSH access should only occur from the 192.168.1.0/24 and 172.16.254.0/23 networks.
Which tmsh command should the LTM Specialist use to permit access from the desired networks only?

 
 
 
 

NEW QUESTION 73
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)

B)

C)

D)

 
 
 
 

NEW QUESTION 74
A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:

Which action should be taken to correct this issue?

 
 
 
 

NEW QUESTION 75
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?

 
 
 
 
 

NEW QUESTION 76
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:

A list of the monitor configuration shows the following:

Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)

 
 
 
 
 

NEW QUESTION 77
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?

 
 
 
 

NEW QUESTION 78
Refer to the exhibit.

The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
– Traffic Groups A and C have Default Device set to LTM1
– Traffic Groups Band D have Default Device set to LTM2.
– Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
– Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?

 
 
 
 

NEW QUESTION 79
An LTM Specialist upgrades the switching infrastructure and the backend servers on the LAN segments.
The LTM Specialist notices a 20% memory usage increase on the BIG-IP device while handling the same number of concurrent connections.
A comparison of statistics pre-upgrade and post-upgrade shows a significant reduction on the following:
-RTT between the BIG-IP device and the backend servers
-Packet drops in the switch
Time to First Byte (TTFB)
The LTM Specialist is concerned with the scalability of the number of concurrent connections with the new memory usage.
Which setting should be changed to reduce the memory usage on the BIG-IP device?

 
 
 
 

NEW QUESTION 80
An LTM device receives a response string containing “error”
Which monitor type and parameter will mark the HTTP server as down?

 
 
 
 

NEW QUESTION 81
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

 
 
 
 

NEW QUESTION 82
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?

 
 
 
 

NEW QUESTION 83
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

 
 
 
 

NEW QUESTION 84
An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate with the application servers.
Which additional profile is required as part of virtual server configuration?

 
 
 
 

NEW QUESTION 85
A customer wants to select the pool for an application based on information found in the path of the URL.
For example:
http://www.example.com/app 1 should be sent to the app 1 pool
http.//www.exampie.com/app 2 should be sent to the app2 pool
Which two profiles need to be assigned to the virtual server? (Choose two.)

 
 
 
 
 

301a Dumps Real Exam Questions Test Engine Dumps Training: https://www.passleadervce.com/LTM-Specialist/reliable-301a-exam-learning-guide.html

         

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw

By adminTags: , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below