[Q43-Q65] NS0-516 Certification Exam Dumps Questions in here [May-2022]

4/5 - (1 vote)

NS0-516 Certification Exam Dumps Questions in here [May-2022]

Updated NS0-516 Exam Practice Test Questions

NEW QUESTION 43
Which scenario is allowed for mirroring between sites?

FDE enabled on the primary volume and disabled on the secondary volume

Data Assurance enabled on the primary volume and enabled on the secondary volume

FDE disabled on the primary volume and enabled on the secondary volume

Data Assurance disabled on the primary volume and enabled on the secondary volume

NEW QUESTION 44
Which object provides read/write access to a Snapshot image?

Snapshot group

Base volume

Snapshot repository

Snapshot volume

NEW QUESTION 45
Storage system volumes can be built upon what two types of logical structures? (Choose the best answer.)

Volume Pools and Virtual Disks

Virtual Disks and Disk Pools

Volume Groups and Disk Pools

Volume Groups and Virtual Disks

Volume Pools and Volume Groups

NEW QUESTION 46
Which three factors should you consider before you install an E2860 in a data center? (Choose three)

current draw

electromagnetic interference

heat dissipation

ambient temperatures

fire suppression capacity

NEW QUESTION 47
What is a NetApp best practice recommendation for the system monitor?

It should be stopped during a controller firmware upgrade.

It should run only on one management server connected to the storage system.

It should run on all storage manager clients.

It should run only on Windows server systems.

NEW QUESTION 48
What four resources have information to determine space and power & cooling requirements for E-Series storage systems? (Choose four.)

Hardware cabling guide

Install Guide

Hardware Universe

E-Series System Data Sheets

E-Series Power & Cooling Calculator

Site Prep Guide

NEW QUESTION 49
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)

Recovery Guru

Host Mappings tab

Real-time performance monitor

Unreadable sectors log

NEW QUESTION 50
Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC You use the storage array profile to review the installed SFPs.
In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?

25 Gbps, 10 Gbps

32 Gbps, 16 Gbps, 8 Gbps, 4 Gbps

16 Gbps, 10 Gbps, 8 Gbps, 4 Gbps

16 Gbps, 8 Gbps, 4 Gbps

NEW QUESTION 51
An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails.
In this scenario, what should the administrator do to satisfy this requirement?

Create the disk pool, and then edit the pool to reserve 12 TB of space

Create the disk pool, and then add another 12 TB drive to the pool

Create the disk pool, and then the system automatically reserves 12 TB of space

Create the disk pool, and then create a hot spare on another 12 TB disk

NEW QUESTION 52
A customer needs a system for a new solution that they are designing. They have provided you with the performance and capacity requirements.
In the NetApp Fusion UI, which workflow should you perform to help the customer?

Design a System Manually

Modify Existing Storage

Size and Recommend

Perform a Tech Refresh

NEW QUESTION 53
What is the ‘base’ host connectivity provided by the E5400 Controller? (Choose the best answer.)

None

iSCSI

SAS

NEW QUESTION 54
A customer has a storage system that has been configured with multiple RAID 5 volume groups. The customer would like to reclaim capacity from the volume groups to use for a new application.
In this scenario, which action will solve this problem?

Shrink the size of the volume groups by using the volume group drive removal procedure, and then redeploy the drives as required for the new application.

Turn on thin provisioning for the RAID 5 volume groups to shrink the size of each volume, and then use the volume group drive removal procedure to reclaim the drives for the new application.

Consolidate free capacity for the volume group, remove the drives that are required for the new application, and let the volume group rebuild automatically.

Migrate all the data off each RAID 5 volume group, recreate the volume groups with fewer drives, and then migrate the data to the new RAID 5 volume groups.

NEW QUESTION 55
What does the CHAP secret accomplish for an E-Series system?

Ethernet management authentication

SAS authentication

FC authentication

iSCSI authentication

NEW QUESTION 56
You need to run a command from the SANtricity System Manager GUI to mark drives as native by using the CLI tool on an E-Series system that is running System Manager 11.60 or higher.
In this scenario, where would you locate this tool?

Help -> CLI Command Reference

Support -> Support Center -> Diagnostics

Modify Existing Storage

Settings -> System -> Addons

NEW QUESTION 57
Controller firmware package files start with which character(s)? (Choose the best answer.)

SMIA

CFW

DLP

NEW QUESTION 58
How many partitions are being used in this storage system?

NEW QUESTION 59
What is SMutil? (Choose the best answer.)

a host I/O performance modeling interface

a GUI or CLI run on a host server used for storage system management

inter-process communication that supports computer program subroutines

an OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems

a host server process that enables storage system management with the storage data path

NEW QUESTION 60
Which interface launches the script engine for a storage system? (Choose the best answer.)

MPIO

DDP

ALUA

AMW

EMW

NEW QUESTION 61
Your company has an E-Series system connected to Cisco MDS switches. You are asked to provision a volume on a new Windows host, but the Windows host is unable to connect to the volume on the E-Series system. All other Windows hosts in the fabric are able to connect to their volumes.
In this scenario, which three actions should you perform to accomplish this task? (Choose three.)

Create a new virtual SAN (VSAN)

Obtain the WWPN for the Windows HBA

Restart the switches

Create a single-initiator zone with the host and E-Series system

Add a zone to the active zoneset

NEW QUESTION 62
Exhibit:

Referring to the exhibit, which cable is an InfiniBand 4X connector?

NEW QUESTION 63
A customer wants to manage an E-Series system over a secure connection between the system and a server. During implementation, you are asked to fulfill this installation requirement.
In this scenario, which three actions are required to complete this task? (Choose three.)

Disable the legacy management interface on the system

Disable all the system’s local user roles except admin

Import certificate authority signed certificates into the system

Import the system’s self-signed certificates into the system

Complete the certificate signing request on the system

NEW QUESTION 64
Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)

Storage Array Profile

Real-time performance monitor

Recovery Guru

Unreadable Sectorslog

NEW QUESTION 65
You are setting-up asynchronous mirroring between two E2860 systems.
In this scenario, which two prerequisites are required to complete the setup? (choose two)

both the primary and secondary systems must be using the same subnets for mirroring connections

The secondary system must have 2X the storage capacity of the primary system

Both systems must be discovered by an Enterprise Management Window (EMW) or SANtricity Unified Manager

Both the primary and secondary systems must have the same premium features licensed