Real Juniper JN0-1362 Exam Dumps with Correct 130 Questions and Answers [Q33-Q49]

5/5 - (1 vote)

Real Juniper JN0-1362 Exam Dumps with Correct 130 Questions and Answers

Valid JN0-1362 Test Answers & Juniper JN0-1362 Exam PDF

NO.33 Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)

MPLS labels enable several logically separated networks to share a common network infrastructure.

A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.

The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.

MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.

NO.34 Exhibit.

You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?

You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.

You must use a service provider Layer 3 VPN to establish routing protocols across the circuit

You must implement GRE over IPsec to establish routing protocols across the circuit.

You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.

NO.35 Your customer is deploying a large number of Juniper WAN edge devices spread across several remote locations. The customer wants to create an isolated out-of-band management network where these devices can be securely accessed and managed using the CLI and, where possible, the WebUI Which two statements will satisfy the customer’s requirements’? (Choose two)

Ensure the devices are running the FIPS version of the Junos OS.

Enable the SSH and HTTPS services on each WAN edge device

Implement a management configuration group on all WAN edge devices.

Place all management interfaces on a common Layer 2 network

NO.36 You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods that you would provide in your design? (Choose two.)

Internet WAN

Layer 3 VPN

Layer 2 VPN

VPLS

NO.37 Your company is designing a new data center in a remote location that must be connected to your local data center. You have a service provider connection between the CE devices at each site. You want to implement EVPN with VXLAN services between sites, but the service provider does not offer EVPN services.
Which two statements are true in this scenario? (Choose two )

The provider’s edge devices must map your VXLAN VNIs to MPLS LSPs within the provider network at each site

The customer’s edge devices within your data center can act as VXLAN Layer 2 gateways

You can still implement EVPN service across the service provider as long as there is IP reachability between the sites.

The service provider must provide an MPLS-based VPN connection between sites

NO.38 You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )

interfaces

instance type

VRF target

router ID

NO.39 Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?

Apply a behavior aggregate classifier to the egress interface.

Apply a custom rewrite rule to the ingress interface.

Apply a multifield classifier to the ingress interfaces.

Apply a custom scheduler map to the ingress interface.

NO.40 Exhibit.

You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?

Force the ISP A to ISP D traffic over RSVP-signaled LSPs.

Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.

Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.

Force the ISP A to ISP D traffic over LDP-signaled LSPs.

NO.41 Which two statements are correct about Junos Space Connectivity Services Director? (Choose two)

It is used to design, provision, and monitor Label Discovery Protocol (LDP) and Border Gateway Protocol (BGP) services on devices

It is used to design and simulate MPLS-TE and LSP routing.

It is used to design, provision, and deploy MPLS-dynamic, RSVP-signaled LSP, and static LSP services on devices.

It is used to provide zero touch provisioning (ZTP), which simplifies the deployment of networks by providing policy-driven plug-and-play provisioning and network bring-up operations.

NO.42 In your class-of-services design, you are using a multified classifier on your WAN edge devices to ensure that traffic is properly classified entering your network. You are asked to ensure that all packets traversing your core will be handled in the same manner without using firewall filters.
Given this scenario, which statement is correct?

You should use forwarding classes to property mark all DiffServ values because traffic is entering your core devices.

You should use rewrite rules to properly mark all DiffServ values because traffic is entering your core devices from your edge

You should use a scheduler on all core devices to property classify incoming traffic to ensure it is handled the same.

You should use a behavior aggregate (BA) classifier on all core devices to ensure incoming traffic is handled the same.

NO.43 Which two network availability features require a router to have two Routing Engines installed? (Choose two.)

JVRRP

GRES

nonstop routing

graceful restart

NO.44 Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer’s concern?

802 1x

MACsec

BGPFIowSpec

802 3ad

NO.45 You are asked to provide a design proposal for a service provider’s core network. The network consists of both IPv4 and IPv6 addresses and must scale up to 50 core routing devices.
In this scenario, which statement is correct regarding the IGP design?

You can use OSPFv2 for IPv4 and OSPFv3 for IPv6 at the same time.

You must use OSPFv3 to support both address families.

You can use OSPFv2 to support both address families.

You must use IS-4S to support both address families.

NO.46 You work for a service provider that offers L3VPN services to its customers. While designing L3VPN solutions for customers, you sometimes need to share routes between routing instances as part of the design.
What are two reasons for sharing routes between routing-instances? (Choose two)

so customers can reach the Internet

to allow the service provider’s OoB network to be reachable by customers

so customers can reach the service provider’s public cloud infrastructure

to support network address translation

NO.47 What are two considerations for using the public Internet for WAN connectivity? (Choose two.)

End-to-end traffic is best effort.

It is inherently insecure, and additional encryption should be considered.

End-to-end CoS and larger MTU are possible.

It is inherently secure and does not require additional encryption.

NO.48 You are designing a new SDN WAN solution for a large enterprise MPLS backbone. The existing customer network has some LSPs in place that were manually provisioned. The customer requires that the solution provide for complete LSP life cycle management. You are considering the NorthStar Controller as pan of the design.
Which two LSP types would be managed in this scenario? (Choose two )

PCC administered

PCE administered

PCE controlled

PCE delegated

NO.49 You are deploying new WAN services between two routers and you are required to encrypt all traffic at Layer 2 Which solution would satisfy this requirement?

802.1X

MACsec

IPsec

RADIUS

JN0-1362 Exam Questions and Valid PMP Dumps PDF: https://www.passleadervce.com/JNCDS-SP/reliable-JN0-1362-exam-learning-guide.html

Leave a Reply Cancel reply