300-430 Practice Dumps – Verified By PassLeaderVCE Updated 160 Questions [Q30-Q44]

4.2/5 - (4 votes)

300-430 Practice Dumps – Verified By PassLeaderVCE Updated 160 Questions

Updated 300-430 Exam Dumps – PDF Questions and Testing Engine

Monitoring

This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:

Managing rogues and alarms;
Troubleshooting the client’s connectivity.
Utilizing reports on Cisco DNA Center and PI;
Managing RF interferers;

NEW QUESTION 30
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?

Configure a second WLC to support half of the APs in the deployment.

Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.

NEW QUESTION 31
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)

mDNS uses only UDP port 5436 as a destination port.

mDNS cannot use UDP port 5353 as the destination port.

mDNS is not supported on FlexConnect APs with a locally switched WLAN.

Controller software must be newer than 7.0.6+.

mDNS is not supported over IPv6.

NEW QUESTION 32
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?

WPA key

session key

encryption key

shared-secret key

NEW QUESTION 33
An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

pre-authentication

local EAP

authentication caching

Cisco Centralized Key Management

NEW QUESTION 34
Which customizable security report on Cisco Prime Infrastructure will show rogue APs detected since a point in time?

Network Summary

Rogue APs Events

New Rogue APs

Rogue APs Count Summary

NEW QUESTION 35
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)

After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.

NTP can be configured, but that is not recommended.

The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.

If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.

Explanation

https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html

NEW QUESTION 36
A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?

Rogue AP Events

Rogue APs

New Rogue APs

Rogue AP Count Summary

NEW QUESTION 37
An engineer is deploying a virtual MSE. The network has 3000 APs and needs 7000 IPS licenses. To which size server does the engineer scale it?

high end

low end

standard

virtual

NEW QUESTION 38
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?

multicast

static IP

fast roaming

mDNS

Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html

NEW QUESTION 39
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

3 hours

24 hours

3 days

7 days

Explanation

(7 Days is the max, you can select

NEW QUESTION 40
An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?

100

250

1000

500

You can order Cisco 5500 Series Controllers with support for 12, 25, 50, 100, 250 or 500 APs as the controller’s base capacity. You can add additional AP capacity through capacity adder licenses available at 25,
50, 100 and 250 AP capacities. You can add the capacity adder licenses to any base license in any combination to arrive at the maximum capacity of 500 APs.
Reference: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112926-5508- wlc-license.html

NEW QUESTION 41
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?

split tunneling

SE-connect

FlexConnect

AP failover priority

NEW QUESTION 42
A wireless engineer is configuring LWA using ISE. The customer is a starting company and requested the wireless users to authenticate against a directory, but LDAP is unavailable. Which solution be proposed in order to have the same security and user experience?

Use a preshared key on the corporate WLAN

Use Novell eDirectory

Use SAML

Use the internal database of the RADIUS server.

NEW QUESTION 43
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

X, Y real location

client description

AP name

client MAC address

WLC IP address

NEW QUESTION 44
A customer wants the APs in the CEO’s office to have different usernames and passwords for administrative support than the other APs deployed throughout the facility. Which feature must be enabled on the WLC and APs to achieve this goal?

local management users

802.1X supplicant credentials

override global credentials

HTTPS access

Explanation
You can set a global username, password, and enable password that all access points that are currently joined to the controller and any that join in the future inherit as they join the controller. If desired, you can override the global credentials and assign a unique username, password, and enable password for a specific access point.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS

Loading …

New (2022) Cisco 300-430 Exam Dumps: https://www.passleadervce.com/CCNP-Enterprise/reliable-300-430-exam-learning-guide.html

Monitoring

Leave a Reply Cancel reply