Q36. After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

Q37. Dell EMC PowerEdge 14G servers support which technology?

Q38. What is a characteristic of out-of-band management?

Q39. You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?

Q40. A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.
How can the technician find out what the error message was?

Q41. Match each status LED indicator on the Dell EMC 14G PowerEdge server with its corresponding condition.

Q42. What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

Q43. A technician working with a Dell EMC PowerEdge 1 take corrective action?

Q44. Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

Q45. What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

Q46. What happened on April 30, 2019?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

Q47. Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?

Q48. What is required to use the iSM Automatic System Recovery feature?

Q49. What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

Q50. A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.
What is the recommended solution?

Q51. What is a valid password option available from the iDRAC9 Unique ID feature?