Posted on
4.6/5 - (5 votes)

Achieve The Utmost Performance In 300-730 Exam Pass Guaranteed

Achive your Success with Latest Cisco 300-730 Exam

Besides benefiting from skills you acquire during training, the course also provides a chance to gain 40 CE units, which are used for recertification. Once you have completed it, you will know that you are exam ready and you are able to meet the following objectives:

  • You can troubleshoot varied VPN options present on a router as well as firewalls for Cisco
  • You can use the site-to-site VPN options that are present on Cisco router as well as firewalls
  • You can make use of options for remote access VPNs on Cisco router in addition to firewalls
  • You have a thorough knowledge of the site-to-site as well as remote access VPN designs

Once you feel your understanding of the above areas is deep, you can proceed to taking 300-730 exam. However, not all this knowledge can be gained from one source. It is important to complement the course with other relevant study materials like study guides.

Preparation Phase

Numerous resources are available to the applicants who are looking to ace the Cisco 300-730 exam. The specialists can find both the official training materials and various learning tools by other reputable platforms to help them to achieve success in the test. To get started with their preparation phase, the students can check the official training course: Implementing Secure Solutions with Virtual Private Networks. It explores the steps involved in setting, implementing, supporting, and monitoring enterprise VPN solutions. It combines practical experiences and instructor-led lessons to equip the learners with the knowledge and skills that are required for troubleshooting and deploying IPsec, DMVPN, remote access VPN, and FLexVPN for creating encrypted and secure data increased privacy and remote accessibility. After completing this training option, the individuals will get 40 CE credits toward recertification.

Topics covered by Cisco 300-730 exams

  • Secure Communications Architectures: 30%

  • Remote access VPNs: 20%

  • Troubleshooting using ASDM and CLI: 35%

  • Site-to-site Virtual Private Networks on Routers and Firewalls: 15%

 

QUESTION 65
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)

 
 
 
 
 

QUESTION 66
The corporate network security policy requires that all internet and network traffic must be tunneled to the corporate office. Remote workers have been provided with printers to use locally at home while they are remotely connected to the corporate network. Which two steps must be executed to allow printing to the local printers? (Choose two.)

 
 
 
 
 

QUESTION 67
An engineer notices that while an employee is connected remotely, all traffic is being routed to the corporate network. Which split-tunnel policy allows a remote client to use their local provider for Internet access when working from home?

 
 
 
 

QUESTION 68
Drag and drop the code snippets from the right onto the blanks in the configuration to implement FlexVPN. Not all snippets are used.

QUESTION 69
Refer to the exhibit.

Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)

 
 
 
 
 

QUESTION 70
Refer to the exhibit.

What is configured as a result of this command set?

 
 
 
 

QUESTION 71
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?

 
 
 
 

QUESTION 72
What is a requirement for smart tunnels to function properly?

 
 
 
 

QUESTION 73
A network engineer must implement an SSLVPN Cisco AnyConnect solution that supports 500 concurrent users, ensures all traffic from the client passes through the ASA, and allows users to access all devices on the inside interface subnet (192.168.0.0/24). Assuming all other configuration is set up appropriately, which configuration implements this solution?

 
 
 
 

QUESTION 74
A network administrator is troubleshooting a FlexVPN tunnel. The hub router is unable to ping the spoke router’s tunnel interface IP address of 192.168.1.2, even though the tunnel is showing up. The output of the debug ip packet CLI command on the hub router shows the following entry.
IP: tableid=0123456789 s=192.168.1.1 (local), d=192.168.1.2 (loopback2), routed via FIB.
What must be configured to fix this issue?

 
 
 
 

QUESTION 75
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?

 
 
 
 

QUESTION 76

Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?

 
 
 
 

QUESTION 77
Refer to the exhibit.

A user is connecting from behind a PC with a private IP Address. Their ISP provider is blocking TCP port 443. Which AnyConnect XML configuration will allow the user to establish a connection with the ASA?

 
 
 
 

QUESTION 78
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?

 
 
 
 

QUESTION 79
Refer to the exhibit.

A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?

 
 
 
 

QUESTION 80
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)

 
 
 
 
 

QUESTION 81
Refer to the exhibit.

A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?

 
 
 
 

QUESTION 82
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?

 
 
 
 

QUESTION 83
Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)

 
 
 
 
 

QUESTION 84
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)

 
 
 
 
 

QUESTION 85
Which feature allows a DMVPN Phase 3 spoke to switch to an alternate hub when the primary hub is unreachable?

 
 
 
 

QUESTION 86
An engineer has successfully established a Phase 1 and Phase 2 tunnel between two sites. Site A has internal subnet 192.168.0.0/24 and Site B has internal subnet 10.0.0.0/24. The engineer notices that no packets are decrypted at Site B. Pings to 192.168.0.1 from internal Site B devices make it to the Site B router, and the Site A router has incrementing encrypt and decrypt counters. What must be done to ensure bidirectional communication between both sites?

 
 
 
 

QUESTION 87
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?

 
 
 
 

Revolutionary Guide To Exam Cisco Dumps: https://www.passleadervce.com/CCNP-Security/reliable-300-730-exam-learning-guide.html

         

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

By adminTags: , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below