Cisco 300-615 Certification All-in-One Exam Guide Nov-2024 [Q119-Q138]

5/5 - (2 votes)

Cisco 300-615 Certification All-in-One Exam Guide Nov-2024

Get Real 300-615 Exam Dumps [Nov-2024] Practice Tests

Cisco 300-615 exam, also known as Troubleshooting Cisco Data Center Infrastructure, is an assessment of the skills and knowledge of professionals dealing with data center infrastructure. Candidates who take 300-615 exam are expected to have experience in troubleshooting network infrastructure, storage networks, compute platforms, and management and automation tools. 300-615 exam measures a candidate’s ability to identify and solve problems in complex data center environments, including physical and virtual network elements, application components, and storage systems.

Cisco 300-615 exam is a computer-based test that consists of multiple-choice questions. The test duration is 90 minutes, and the candidates are required to answer 60-70 questions. 300-615 exam is available in English and Japanese languages. The test is conducted by Pearson VUE, and the registration fee for the exam is $300.

NEW QUESTION 119

Refer to the exhibit. An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

Configure the role name to match the group name on Microsoft Active Directory.

Include specific users into MDS role configuration.

Configure SSH logins on Cisco MDS switch.

Integrate Cisco MDS with Microsoft Active Directory.

NEW QUESTION 120

Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?

Append action 2.0 event-default to the script

Append action 2.0 cli “conf t” to the script

Modify snmp-trap strdata “Configuration changed” to syslog msg Configuration changed

Modify cli match “conf t” to “snmp match “conf t”

NEW QUESTION 121

Refer to the exhibit. An engineer troubleshoots why user 1, user 2, and user 3 from the group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

Configure the role name to match the group name on Microsoft Active Directory.

Include specific users in the Cisco MDS role configuration.

Configure SSH logins on the Cisco MDS switch.

Integrate Cisco MDS with Microsoft Active Directory.

NEW QUESTION 122
Refer to the exhibit.

The OTV overlay is deployed in multicast mode. After an unexpected reload of N7K-SITE1-OTV1, the network administrator observed that on N7K-SITE1-OTV2 the OTV site adjacency went into the partial state. Which action resolves the issue?

Configure the Site-Identifier on N7K-SITE1-OTV1 to 0002.0002.0002.

Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.

Change the Site-VLAN on N7K-SITE1-OTV2 to VLAN 1.

Modify the multicast data-group on N7K-SITE1-OTV1 to match N7K-SITE1-OTV2.

NEW QUESTION 123
Refer to the Exhibit. An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?

Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.

Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.

NEW QUESTION 124
Refer to the exhibit.

When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?

Port 15 is configured as an Ethernet port.

Port 15 is configured for 4-Gb FC.

Port 15 is missing a license.

The polarity of the fiber cable is reversed.

NEW QUESTION 125
Refer to the exhibit.

The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?

switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

NEW QUESTION 126
Refer to the exhibit.

A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Etht/7?

IOM network interface

fabric interconnect uplink interface

IOM host interface

server interface

NEW QUESTION 127
Refer to the exhibit.

The HSRP configuration in the exhibit fails to function. Which action resolves this issue?

Enable IP redirects.

Set the MTU to 1500 bytes.

Configure HSRP version 2.

Configure the same HSRP group on both devices.

NEW QUESTION 128
An engineer upgrades Cisco UCS firmware from release 3. 1(2) to release 3. 1(3) using Autolnstall. Both fabric interconnects go ofline during the software upgrade installation and issue multiple F SM retries in the DeployPollActivate stage. Which set of actions resolves the issue?

Fix the rights to 666 with the debug plugin on the primary fabric interconnet Save the current configuration on the running fabric interconnect.
Continue the upgrade on both fabric interconnects.

Enable the management interface monitoring policy on the fabric interconnects. Initiate a configuration backup on both fabric interconnects.
Commit the pending fabric interconnect reboot activity.

Acknowledge the error and reboot the primary fabric interconnect. Clear the default firmware version and upload a new one.
Restart the upgrade process manually.

Clear the startup version of the default infrastructure and server pack. Remove the service pack from the subordinate node.
Upgrade with the Force attribute through Autolnstall.

NEW QUESTION 129
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.

1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.

NEW QUESTION 130
Refer to the exhibit. After the configuration is performed, guestshell continues to use 2%CPU.
Which action resolves the issue?

Resync the database

Recreate the guestshell

Reboot the guestshell

Reboot the switch

NEW QUESTION 131
An engineer upgrades Cisco UCS firmware from release 3.1(2) to release 3.1(3) using Autolnstall. Both fabric interconnects go ofline during the software upgrade installation and issue multiple F SM retries in the DeployPollActivate stage.
Which set of actions resolves the issue?

Fix the rights to 666 with the debug plugin on the primary fabric interconnet.
Save the current configuration on the running fabric interconnect.
Continue the upgrade on both fabric interconnects.

Enable the management interface monitoring policy on the fabric interconnects.
Initiate a configuration backup on both fabric interconnects.
Commit the pending fabric interconnect reboot activity.

Acknowledge the error and reboot the primary fabric interconnect.
Clear the default firmware version and upload a new one.
Restart the upgrade process manually.

Clear the startup version of the default infrastructure and server pack.
Remove the service pack from the subordinate node.
Upgrade with the Force attribute through Autolnstall.

NEW QUESTION 132
Refer to the exhibit.

Refer to the exhibit. An engineer troubleshoots an OSPF neighborship problem between Router R2 and Router R10. Which action resolves the problem?

Change area ID on Router R10

Resolve unicast reply from Router R2

Resolve authentication type on Router R10

Change router ID on Router R10

NEW QUESTION 133
Refer to the exhibit.

An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?

Import or export a zone set between the switches to synchronize the switches.

Change the name of one of the zones to match the other zone set.

Set the distribute policy of the zone to full.

Ensure that the zone members have different names.

NEW QUESTION 134
A user reports that they cannot reach from a UCS server to an FC Storage array. Which command is used to test communication between an FCF and a target?

fcroute

traceroute

fcping

ping

NEW QUESTION 135
After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)

Equipment FSM page, InternalBackup stage

Service profiles page, InternalBackup stage

Admin page, PollInternalBackup stage

Equipment FSM page, PollInternalBackup stage

Admin page, InternalBackup stage.

NEW QUESTION 136
Refer to the exhibit.

The vPC between switch1 and switch2 does not work. Which two actions resolve the problem? (Choose two.)

Configure the IP address on the interface.

Activate VLANs on the vPC.

Configure one of the switches as primary for the vPC.

Correct the configuration of the vPC peer link and the vPC peer keepalive.

Match the vPC domain ID between the two devices.

NEW QUESTION 137
What does this adapter output indicate?
adapter 1/6/1 (fls): 2# lunlist 9
vnic: 9 lifid: 6
– FLOGI State : flogi est (fc_id Oxac0e04)
– PLOGI Sessions
– WWNN 50:0a:09:83:8d:53:43:44 WWPN 50:0a:09:83:8d:53:43:44 fc_id
0x000000
– LUN’s configured (SCSI Type, Version, Vendor, Serial No.)
– LUN ID: Ox0000000000000000 access failure
– REPORT LUNs Query Response
– Nameserver Query Response
– WWPN: 54:b1:6a:94:64:3e:73:44

The configured initiator LUN ID does not match the configured target LUN ID

The target device configuration does not allow the initiator to access the LUN

The port types between the target and initiator are incorrectly configured

The target of the configured zone does not match the target of the configured boot order

NEW QUESTION 138
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
Which statement about what occurs when the new uplinks are added is true?

Only new connections use the new uplinks automatically.

Paths must be defined before new connections can use the new uplinks.

All connections must be reset before the new uplinks can be used.

New and existing connections use the new uplinks automatically.