[Dec-2024] Free HPE0-S59 Exam Dumps to Improve Exam Score [Q41-Q60]

Q41. You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

App Volume Set

Storage Container

Virtual Volume Set

virtual Volume

Q42. Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

It is equipped with HPE Persistent memory by default

It can support a single processor only and up to 4 per chassis

It is fully managed using HPE OneView including all connections

It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Q43. Match HPE Superdome Flex system with its specific feature.

Q44. Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?

The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView

The customer should deploy an HPE OneView appliance for HPE Superdome Flex management

The customer must add a second Rack Management Controller for HPE Superdome Flex 280

The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

Q45. Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?

Utilization sampling for HPE VC FC modules must be enabled manually using CLI.

For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled

For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied

Utilization sampling works the same way tor any type of HPE Synergy interconnect modules

Q46. What is a restriction of using a RoCE network?

It is by default configured as an untagged network and cannot be a part of a network set.

It does not support Private VLAN and Multicast VLAN.

it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

It does not support smart link and private network features.

Q47. Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Q48. Your customer has me following HPE Synergy setup
– Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
– Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
– Four HPE Synergy 50Gb interconnect Link Module
– Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?

The additional frame must have HPE Virtual Connect FC modules installed

The customer can grow the existing logical enclosure up to 5 frames

The customer has to create a new logical enclosure for the additional frame

The additional frame cannot have 12Gb SAS connection modules installed

Q49. Refer to the exhibit.

Which statement about this logical JBOD is true?

This logical JBOD can be connected to multiple systems to formulate a snared datastore.

After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created

After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

This logical JBOD can be presented to the compute nodes in a different frame.

Q50. You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules

Q51. You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

Virtual Distributed Switch

vSphere Standard license

Load balancing cluster

Dedicated VMKernel port

Q52. Which statement about the HPE D3940 storage module is true?

SATA drives requires redundant 10 adapters to be installed in this module

Up to five modules can be installed in a single frame with Gen10 servers

it is configured through CLl available from HPE Synergy console

Only one type of drives (SATA, SAS, SSD) can be installed in each module

Q53. Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

Pause flood protection

Loop protection

LLDP tagging

Storm control

Q54. Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

Q55. Which statement about an HPE Oneview support dump is true?

Appliance support dump by default contains a logical enclosure support dump

Support dump is a binary file that can be opened only in a dedicated application

Support dump can be created if HPE Virtual Connect modules are installed in the frame

Preview support dump is available only when creating an appliance support dump

Q56. Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.

For Brocade switches, a logical interconnect group must be created in HPE OneView.

For VC-FC modules, all of server facing ports must be property licensed.

SAS switches must be moved to second fabric and FC modules Installed in the first one.

Q57. Which compute node parameters are captured within server hardware type?

Number of the CPUs

installed operating system

Mezzanine card configuration

Size of the memory Installed

Q58. Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?

HPE ProLiant DL580 Gen10

HPE ProLiant OL380 Gen 10 Plus

HPE Synergy 480 Gen10 Plus

HPE Superdome Flex system

Q59. Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
– two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
– two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
– two HPE Synergy Virtual Connect SE 32Gb FC Modules
– two HPE Synergy 20Gb interconnect Link Modules
– Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

Four compute modules must be moved to the second frame to balance the configuration

The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option

A license for an extended logical enclosure must be added to HPE OneView through GUI

The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Q60. Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer’s requirements?

HPE ProLiant DL380 Gen 10 Plus

HPE Synergy 480 Gen10 Plus

HPE ProLiant DL560 Gen10

HPE Superdome Flex 280

Leave a Reply Cancel reply