[Dec 30, 2023] NSE8_812 Exam Dumps – 100% Marks In NSE8_812 Exam! [Q22-Q41]

4.2/5 - (4 votes)

[Dec 30, 2023] NSE8_812 Exam Dumps – 100% Marks In NSE8_812 Exam!

Exam Dumps Use Real Fortinet Network Security Expert Dumps With 62 Questions!

Fortinet NSE8_812 certification exam, also known as the Fortinet NSE 8 – Written Exam, is a comprehensive assessment of an individual’s knowledge and skills in advanced network security. NSE8_812 exam is designed for professionals who are seeking to validate their expertise in designing, implementing and managing complex security infrastructures. The NSE8_812 exam is considered as a benchmark for advanced network security professionals, and passing NSE8_812 exam is a prerequisite for obtaining the NSE 8 certification.

NO.22 Refer to the exhibits.

The exhibits show a FortiMail network topology, Inbound configuration settings, and a Dictionary Profile.
You are required to integrate a third-party’s host service (srv.thirdparty.com) into the e-mail processing path.
All inbound e-mails must be processed by FortiMail antispam and antivirus with FortiSandbox integration. If the email is clean, FortiMail must forward it to the third-party service, which will send the email back to FortiMail for final delivery, FortiMail must not scan the e-mail again.
Which three configuration tasks must be performed to meet these requirements? (Choose three.)

Change the scan order in FML-GW to antispam-sandbox-content.

Apply the Catch-Ail profile to the CFInbound profile and configure a content action profile to deliver to the srv. thirdparty. com FQDN

Create an access receive rule with a Sender value of srv. thirdparcy.com, Recipient value of *@acme.com, and action value of Safe

Apply the Catch-AII profile to the ASinbound profile and configure an access delivery rule to deliver to the 100.64.0.72 host.

Create an IP policy with a Source value of 100. 64 .0.72/32, enable precedence, and place the policy at the top of the list.

NO.23 A customer wants to use the FortiAuthenticator REST API to retrieve an SSO group called SalesGroup. The following API call is being made with the ‘curl’ utility:

Which two statements correctly describe the expected behavior of the FortiAuthenticator REST API? (Choose two.)

Only users with the “Full permission” role can access the REST API

This API call will fail because it requires that API version 2

If the REST API web service access key is lost, it cannot be retrieved and must be changed.

The syntax is incorrect because the API calls needs the get method.

NO.24 Refer to the exhibit showing a FortiSOAR playbook.

You are investigating a suspicious e-mail alert on FortiSOAR, and after reviewing the executed playbook, you can see that it requires intervention.
What should be your next step?

Go to the Incident Response tasks dashboard and run the pending actions

Click on the notification icon on FortiSOAR GUI and run the pending input action

Run the Mark Drive by Download playbook action

Reply to the e-mail with the requested Playbook action

NO.25 Refer to the exhibits.

A customer has deployed a FortiGate with iBGP and eBGP routing enabled. HQ is receiving routes over eBGP from ISP 2; however, only certain routes are showing up in the routing table-Assume that BGP is working perfectly and that the only possible modifications to the routing table are solely due to the prefix list that is applied on HQ.
Given the exhibits, which two routes will be active in the routing table on the HQ firewall? (Choose two.)

172.16.204.128/25

172.16.201.96/29

172,620,64,27

172.16.204.64/27

NO.26 A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.
CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.
Which two options can resolve this situation? (Choose two.)

Change the persistence rule to LB_PERSIS_SSL_SESSJD.

Add more web servers to the real server poof

Disable SSL between the FortiADC and the web servers

Add a connection-pool to the FortiADC virtual server

The FortiADC HA cluster is a load balancing solution that distributes traffic among multiple web servers in L7 Full NAT mode. L7 Full NAT mode means that FortiADC terminates both client and server SSL connections and performs full NAT for both source and destination IP addresses and ports. One possible reason for users not being able to access the website during a sale event is that the persistence rule is not configured properly. Persistence rule is a feature that ensures that subsequent requests from the same client are sent to the same web server, which is important for maintaining session continuity and avoiding errors or data loss. The default persistence rule for L7 Full NAT mode is LB_PERSIS_SRC_IP, which uses the source IP address of the client as the persistence key. However, this rule may not work well if there are many clients behind a proxy or NAT device that share the same source IP address, or if there are clients that change their source IP address frequently due to roaming or switching networks. Therefore, to resolve this situation, one option is to change the persistence rule to LB_PERSIS_SSL_SESSJD, which uses the SSL session ID of the client as the persistence key. This rule can provide more accurate and reliable persistence for SSL connections than LB_PERSIS_SRC_IP. Another possible reason for users not being able to access the website during a sale event is that there are too many TCP connections being established and terminated between FortiADC and the web servers, which consumes CPU resources and causes performance degradation. Therefore, to resolve this situation, another option is to add a connection-pool to the FortiADC virtual server. Connection-pool is a feature that allows FortiADC to reuse existing TCP connections between FortiADC and the web servers, instead of creating new ones for each request. This can reduce CPU overhead, improve response time, and increase throughput. Reference: https://docs.fortinet.com/document/fortiadc/6.4.0/administration-guide/19662/load-balancing-methods-and-persistence https://docs.fortinet.com/document/fortiadc/6.4.0/administration-guide/19662/connection-pool

NO.27 Refer to the exhibit.

A customer wants FortiClient EMS configured to deploy to 1500 endpoints. The deployment will be integrated with FortiOS and there is an Active Directory server.
Given the configuration shown in the exhibit, which two statements about the installation are correct? (Choose two.)

If no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay.

A client can be eligible for multiple enabled configurations on the EMS server, and one will be chosen based on first priority

You can only deploy initial installations to Windows clients.

You must use Standard or Enterprise SQL Server rather than the included SQL Server Express

The Windows clients only require “File and Printer Sharing0 allowed and the rest is handled by Active Directory group policy

NO.28 Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:

Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?

FortiGate will reject all HTTP/2 ALPN headers.

FortiGate will strip the ALPN header and forward the traffic.

FortiGate will rewrite the ALPN header to request HTTP/1.

FortiGate will forward the traffic without modifying the ALPN header.

NO.29 Refer to the exhibit showing FortiGate configurations

FortiManager VM high availability (HA) is not functioning as expected after being added to an existing deployment.
The administrator finds that VRRP HA mode is selected, but primary and secondary roles are greyed out in the GUI The managed devices never show online when FMG-B becomes primary, but they will show online whenever the FMG-A becomes primary.
What change will correct HA functionality in this scenario?

Change the FortiManager IP address on the managed FortiGate to 10.3.106.65.

Make the monitored IP to match on both FortiManager devices.

Unset the primary and secondary roles in the FortiManager CLI configuration so VRRP will decide who is primary.

Change the priority of FMG-A to be numerically lower for higher preference

NO.30 A remote IT Team is in the process of deploying a FortiGate in their lab. The closed environment has been configured to support zero-touch provisioning from the FortiManager, on the same network, via DHCP options. After waiting 15 minutes, they are reporting that the FortiGate received an IP address, but the zero-touch process failed.
The exhibit below shows what the IT Team provided while troubleshooting this issue:

Which statement explains why the FortiGate did not install its configuration from the FortiManager?

The FortiGate was not configured with the correct pre-shared key to connect to the FortiManager

The DHCP server was not configured with the FQDN of the FortiManager

The DHCP server used the incorrect option type for the FortiManager IP address.

The configuration was modified on the FortiGate prior to connecting to the FortiManager

NO.31 Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)

B)

Option A

Option B

Option C

Option D

NO.32 You must analyze an event that happened at 20:37 UTC. One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled
* The FortiGate is at GMT-1000.
* The FortiAnalyzer is at GMT-0800
* Your browser local time zone is at GMT-03.00
You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

20:37:08

10:37:08

17:37:08

12.37:08

NO.33 You are migrating the branches of a customer to FortiGate devices. They require independent routing tables on the LAN side of the network.
After reviewing the design, you notice the firewall will have many BGP sessions as you have two data centers (DC) and two ISPs per DC while each branch is using at least 10 internal segments.
Based on this scenario, what would you suggest as the more efficient solution, considering that in the future the number of internal segments, DCs or internet links per DC will increase?

No change in design is needed as even small FortiGate devices have a large memory capacity.

Acquire a FortiGate model with more capacity, considering the next 5 years growth.

Implement network-id, neighbor-group and increase the advertisement-interval

Redesign the SD-WAN deployment to only use a single VPN tunnel and segment traffic using VRFs on BGP

NO.34 You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients’ mail What are two possible reasons for this problem? (Choose two.)

The FortiMail access control rule to relay from Office 365 servers FQDN is missing.

The FortiMail DKIM key was not set using the Auto Generation option.

The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.

NO.35 An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

600ms

200ms

300ms

100ms

NO.36 A customer’s cybersecurity department needs to implement security for the traffic between two VPCs in AWS, but these belong to different departments within the company. The company uses a single region for all their VPCs.
Which two actions will achieve this requirement while keeping separate management of each department’s VPC? (Choose two.)

Create a transit VPC with a FortiGate HA cluster, connect to the other two using VPC peering, and use routing tables to force traffic through the FortiGate cluster.

Create an 1AM account for the cybersecurity department to manage both existing VPC, create a FortiGate HA Cluster on each VPC and IPSEC VPN to force traffic between the VPCs through the FortiGate clusters

Migrate all the instances to the same VPC and create 1AM accounts for each department, then implement a new subnet for a FortiGate auto-scaling group and use routing tables to force the traffic through the FortiGate cluster.

Create a VPC with a FortiGate auto-scaling group with a Transit Gateway attached to the three VPC to force routing through the FortiGate cluster

NO.37 Wh.ch feature must you enable on the BGP neighbors to accomplish this goal?

Graceful-restart

Deterministic-med

Synchronization

Soft-reconfiguration

NO.38 You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?

The configuration of the MTA Adapter Local Interface is different than on port1.

The MTA adapter is only available in the primary node.

The MTA adapter mode is only detection mode.

The configuration is different than on a standalone device.

NO.39 Refer to the exhibit, which shows a VPN topology.

The device IP 10.1.100.40 downloads a file from the FTP server IP 192.168.4.50 Referring to the exhibit, what will be the traffic flow behavior if ADVPN is configured in this environment?

All the session traffic will pass through the Hub

The TCP port 21 must be allowed on the NAT Device2

ADVPN is not supported when spokes are behind NAT

Spoke1 will establish an ADVPN shortcut to Spoke2

NO.40 Refer to the exhibit.

A customer wants FortiClient EMS configured to deploy to 1500 endpoints. The deployment will be integrated with FortiOS and there is an Active Directory server.
Given the configuration shown in the exhibit, which two statements about the installation are correct? (Choose two.)

If no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay.

A client can be eligible for multiple enabled configurations on the EMS server, and one will be chosen based on first priority

You can only deploy initial installations to Windows clients.

You must use Standard or Enterprise SQL Server rather than the included SQL Server Express

The Windows clients only require “File and Printer Sharing0 allowed and the rest is handled by Active Directory group policy

NO.41 SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.
You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.
What should you configure?

Configure local out traffic to use the outgoing interface based on SD-WAN rules with a manual defined IP associated to a loopback interface and configure an SD-WAN rule from the loopback to the DNS server.

Configure an SD-WAN rule to the DNS server and use the FortiGate interface IPs in the source address.

Configure two DNS servers and use DNS servers recommended by the two internet providers.

Configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server.